Support

How to Set Up Slide Show Type as Presented by a Speaker in Presentation 2013

A slide show presented by a speaker is the most common used type as well as the default show type (Also view Browsed at Kiosk). The flow of the presentation is controlled this way and the speaker can choose to use the autoplay function. This function allows the speaker to stop, add details, record narration, use the pen tool, and exit the show by pressing <Esc>.

This show type can be modified by the following steps:

Step 1 Click Set Up Show browsed at kiosk in the Slide Show tab. The Set Up Show dialogue box will open and show as in Figure 1 .

Step 2 In the Show Type section, select Presented by a Speaker.

Step 3 In the Show slides section, set the page range to be presented. All is the default option. See below:

presented by a speaker

Figure 1 Modify the show type

Step 4 To loop the slide show continuously, go to the Show option section and check Loop continuously until 'Esc'.

Step 5 Click OK to complete the operation.

There are three ways to start a slide show:

  • 1. Click Slide Showpresented by a speaker at the bottom right of the window.
  • 2. Select From Current Slidepresented by a speaker in the Slide Show tab.
  • 3. Press <F5> to start show from the current slide.

If the animations in the presentation are set to start when clicked, they will be unable to show. If the animations are set to start with the previous, then the next animations will start automatically.